fischer Befestigungssysteme

03/06/2019

Fast design and firm fixings

The INSTALL-FIX module of fischer’s FIXPERIENCE design software allows planners and tradespeople to calculate installation systems along with suitable anchors and documentation in a flexible and simple manner. Just a few clicks and parameter inputs lead to static calculations in accordance with current European technical standards. The programme operates through graphic input and determines the required quantities of individual elements.

More information

02/17/2019

Drilled with questions – filled with answers

An exact drill hole is required before an anchor can be placed. This can be done in an economic manner that conforms to regulations depending on the selected product through the help of fischer drills. Three new high-performance tools are new to the range: the hollow drill FHD for low-dust drilling, the hammer drill SDS Plus Quattric II for reinforced concrete and the SDS Pointer-M for the particularly careful processing of sensitive masonry. All products feature the PGM quality seal for compliant drill holes in accordance with the stipulations of the PGM Masonry Drill Bit Certification Board (PGM).

More information

02/14/2019

Meeting high demands

With its broad selection of screws, the fixing specialist fischer covers a wide range of applications in the field of wood, dry and interior construction. The partial and full- thread screws, Power-Fast and Power-Full, are a particularly economic, reliable and fast solution for numerous wood connections. There are also new corrosion-resistant Power-Fast variants in stainless steel (A2 and A4) with countersunk and disk heads for outdoor use.

More information

02/07/2019

Heavy metal in concrete

The fixing specialist fischer is expanding its range of concrete screws for use with heavy loads with two new variants. This includes the ULTRACUT FBS II made of stainless steel (A4) for individual fixings. Its specially hardened red tip enables quick and safe installation. The second variant is the ULTRACUT FBS II 6 with its individual approval as well as its new approval for multiple anchorings of non load-bearing systems.

More information

01/31/2019

Facade construction in the fourth dimension

The multi-storey office building La Grande Arche de la Fraternité is showcasing itself with a new appearance and the same old charm in Puteaux just outside of Paris. The facade’s Carrara marble was in a very poor, partially damaged state and was therefore replaced by granite slabs held by approximately 76,000 fischer Zykon panel anchors FZP-II as part of a two-phase renovation project.

More information

More results

Seen 190 of 239 result (s)